Marantz PM6003 specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
0.08 % to 1kHz
THD:
10 - 70kHz at +-1dB
Frequency response:
Line level: 87dB, Phono-MM: 84dB
Signal to noise ratio:
Line in: 20 kohms +/-5%, Phono-MM: 47 kohms
Input impedance:
Line level: 200mV, Phono-MM: 2.2mV
Input sensitivity:
Bass: +/- 10dB at 100Hz , Treble: +/- 10dB at 10kHz
Tone controls:
Power amplifier
2
Amplified channels:
45W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz
Power output:
60W per channel into 4 ohms measured at frequencies from 20Hz to 20kHz
10 - 70kHz at +-1dB
Frequency response:
87dB
Signal to noise ratio:
Unbalanced: 20 kohms
Input impedance:
: 0.2V
Input sensitivity:
over 100 at frequencies from 100Hz to10kHz at 8ohms
Damping factor:
A/B Speaker connectors
Features:
Connectivity
Unbalanced (RCA): 10, Phono input (RCA): Yes, Phono-MM
Inputs:
Analog: Unbalanced (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Banana-plug compatible
Yes
Remote control:
Body
17.32 in x 4.13 in x 14.41 in
Dimensions (WxHxD):
16.53 lb
Weight:
Gray
Available color options:
Power
Typical: 150 W, Standby: less than 0.4 W
Consumption:
230 V - 230 V
Power adapter voltage:
50 Hz, 60 Hz
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Marantz Amplifiers
Description: For the PM6003 Marantz took the opportunity to not only change the cosmetics of it?s much appraised predecessor PM6002 to get it in-line with the M1 design, but even extend the quality. It got special treatment to refine the sound and optimise the balance from bass to mid to highs for a performance full of harmony. The new lower impedance case shielded toroidal transformer was matched to new main capacitors which again have been... read more