Denon PMA-2010AE specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
Line level: 108dB, Phono-MC: 74dB, Phono-MM: 89dB
Signal to noise ratio:
Line in: 47 kohms +/-5%, Phono-MC: 100 ohms, Phono-MM: 47 kohms
Input impedance:
Line level: 135mV, Phono-MC: 0.2mV, Phono-MM: 2.5mV
Input sensitivity:
Bass: +/- 8dB at 100Hz , Treble: +/- 8dB at 10kHz
Tone controls:
Power amplifier
2
Amplified channels:
80W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz and THD 0.07%
Power output:
160W per channel into 4 ohms to 1kHz and THD 0.7%
Unbalanced: 47 kohms
Input impedance:
: 0.9V
Input sensitivity:
Connectivity
Unbalanced (RCA): 12, Phono input (RCA): Yes, Phono-MC, Phono-MM
Inputs:
Analog: Unbalanced (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Banana-plug compatible
Yes
Remote control:
Body
17.09 in x 7.13 in x 17.13 in
Dimensions (WxHxD):
52.91 lb
Weight:
Gray
Available color options:
Power
Typical: 310 W, Standby: less than 0.3 W
Consumption:
230 V - 230 V
Power adapter voltage:
50 Hz
Links
Official page:
-
in English:
-
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Denon Amplifiers
Description: To further improve expressiveness in sound, the PMA-2010AE inherits the UHC-MOS Single Push-Pull output circuit from Denon’s higher-end models and is of a newly- engineered construction, forming a solid foundation for a pure, clean sound. The PMA-2010AE is an integrated amp that emulates high-end models in both elegance and sound quality.