Denon PMA-710AE specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
Line level: 107dB, Phono-MM: 86dB
Signal to noise ratio:
Line in: 47 kohms +/-5%, Phono-MM: 47 kohms
Input impedance:
Line level: 105mV, Phono-MM: 2.5mV
Input sensitivity:
Bass: +/- 8dB at 100Hz , Treble: +/- 8dB at 10kHz
Tone controls:
High-current power
Features:
Power amplifier
2
Amplified channels:
50W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz and THD 0.05%
Power output:
85W per channel into 6 ohms to 1kHz and THD 0.7%
High-current power, A/B Speaker connectors
Features:
Connectivity
Unbalanced (RCA): 10, Phono input (RCA): Yes, Phono-MM
Inputs:
Analog: Unbalanced (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Banana-plug compatible
Yes
Remote control:
Body
17.09 in x 4.76 in x 12.09 in
Dimensions (WxHxD):
14.77 lb
Weight:
Black, Gray
Available color options:
Power
Typical: 200 W, Standby: less than 0.3 W
Consumption:
230 V - 230 V
Power adapter voltage:
50 Hz
Links
Official page:
-
in English:
-
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Denon Amplifiers
Description: The PMA-710AE is equipped with a HC (High-Current) Single Push-Pull Circuit that enforces DENON’s design concept for pure audio amplification. This design ensures that you hear delicate musical details, reliably supported by plenty of power. Playback faithful to the original sound is also made possible by a circuit board layout that can handle the greater power from the amplifier section and appropriately respond to the output... read more