Cary Audio Design CAI 1 specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Solid State (Transistor / Integrated Circuit)
Construction type:
Preamplifier
0.0005 % measured at frequencies from 14000Hz to 15kHz
THD:
Power amplifier
125W per channel into 8 ohms
Power output:
250W per channel into 4 ohms
Class D
Amplifier class:
20 - 22kHz at +-0.5dB
Frequency response:
80dB
Signal to noise ratio:
Balanced: 200 kohms, Unbalanced: 100 kohms
Input impedance:
: 1.2V
Input sensitivity:
: 26.8dB
Voltage gain:
over 4000 at frequencies from 100Hz to0.1kHz at 8ohms
Damping factor:
Connectivity
Unbalanced (RCA): 6, Balanced (XLR): 1
Inputs:
Analog: Unbalanced (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Yes
Remote control:
12V Trigger, RS-232
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Cary Audio Design Amplifiers
Description: The Concept Series CAI 1 solid state integrated amplifier is rated at 125 watts per channel at 8 ohms. It is a Class D design with four RCA inputs, Cinema bypass, tape monitor loop and one balanced XLR input. It has remote volume and input selection. The front panel display has read outs of functions and settings. Three remote turn on triggers, IR repeaters, RS 232 port control.