Cary Audio Design CD 303T specs

Specifications:

SACD Mechanism - Triple-beam laser, multi speed SACD transport
Formats - SACD, CD AUDIO (CD-DA), CD-R, CD-RW, HDCD
Master Clock Jitter - Below measurable levels
Digital Sample Rates (Fs) - 44.1, 96, 192, 384, 512 or 768 kHz sample rates for CD playback to the analog audio outputs, 44.1, 96 or 192 kHz Fq for digital inputs
Digital Filter - Burr Brown DF-1706 Software with HDCD decoding
Digital/Analog Converters - Four (4) PCM1792u DAC chips running in parallel pairs
Analog Filter - 3rd Order Bessel
Analog Outputs - Balanced XLR, Single-Ended RCA
Digital Outputs - AES/EBU, Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz 16 bit to 192 kHz 24 bit
Digital Inputs - AES/EBU, Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz 16 bit to 192 kHz 24 bit , USB 24/192
Digital Input Sample Rate - 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz or 192 kHz, Accepts 16, 20, or 24 bits
Communication - RS232 full remote configuration interface
Power Input - Configured at the factory for 100-120 or 200-240 Volts AC @ 50-60Hz
Power Consumption - 65 Watts
Weight - 34 lbs
Dimensions - 5" H x 18" W x 15" D

AUDIO (CD)

Frequency Range - 2 Hz - 22 kHz (44.1 kHz)
Amplitude Linearity - 0.1 dB (20 Hz - 20 kHz)
Phase Linearity - 3 degrees (20 Hz - 20 kHz)
Dynamic Range - 131 dB (1 kHz)
Signal-to-Noise Ratio - 127 (1 kHz)
Channel Separation - 109 (1 kHz)
Total Harmonic Distortion - 0.0004% (1 kHz) THD
Audio Output Level - Single-Ended 3.0 Vrms (220 Ω output impedance)
Balanced XLR 6.0 Vrms (440 Ω output impedance)


AUDIO (saCD)

Frequency Range - 2 Hz - 100 kHz (2.822 MHz)
Signal System - 1 bit DSD
Sampling Frequency - 2.822 MHz
Dynamic Range - 132 dB
DSD System Clock - Frequency 22.5792 MHz
Signal-to-Noise Ratio - 128dB
Audio Output Level - Single-Ended 3.0 Vrms (220 Ω output impedance); Balanced XLR 6.0 Vrms (440 Ω output impedance)