McIntosh MCC302 specs
General info
Car
Amplifier usage:
Power amplifier
Type:
Solid State (Transistor / Integrated Circuit)
Construction type:
Power amplifier
2
Amplified channels:
150W per channel into 4 ohms measured at frequencies from 20Hz to 20kHz and THD 0.005%
Power output:
300W per channel into 2 ohms measured at frequencies from 20Hz to 20kHz and THD 0.008%
Yes
Bridge mode:
600W into 4 ohms
Power :
10 - 100kHz
Frequency response:
105dB
Signal to noise ratio:
Balanced: 12 kohms
Input impedance:
: 0.5V
Input sensitivity:
Connectivity
Unbalanced (RCA): 1
Inputs:
Analog: Unbalanced (RCA), Unbalanced subwoofer line-out (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Body
12.5 in x 3 in x 13.7 in
Dimensions (WxHxD):
14.5 lb
Weight:
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: McIntosh Amplifiers
Description:
The MCC302 consists of two separate power amplifier channels, each capable of 150 watts into 4 ohm speakers with less than 0.005% distortion.
The MCC302 includes two 150 watt amplifier channels. Both channels can be set in bridged configuration for 600 watts output into a 4 ohm loudspeaker with less than 0.008% distortion.
A peak output current of 30 amperes ensures that the MCC302 will successfully drive high quality loudspeakers,... read more