NAD C 375BEE specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
0.004 % measured at frequencies from 20Hz to 20kHz
THD:
20 - 20kHz at +-0.1dB
Frequency response:
Line level: 102dB
Signal to noise ratio:
80dB
Channel separation:
Line in: 100 kohms +/-5%
Input impedance:
Line level: 0.158mV
Input sensitivity:
Bass: +/- 5dB at 100Hz , Treble: +/- 5dB at 10kHz
Tone controls:
Power amplifier
2
Amplified channels:
150W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz and THD 0.009%
Power output:
Yes
Bridge mode:
330W into 8 ohms
Power :
20 - 20kHz at +-0.1dB
Frequency response:
102dB
Signal to noise ratio:
85dB
Channel separation:
Unbalanced: 10 kohms
Input impedance:
: 1.2V
Input sensitivity:
: 29dB
Voltage gain:
over 200 at 8ohms
Damping factor:
A/B Speaker connectors
Features:
Connectivity
Unbalanced (RCA): 16, Phono input (RCA): Yes, Phono-MC, Phono-MM
Inputs:
Analog: Unbalanced (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Banana-plug compatible
12V Trigger, RS-232
Body
17.13 in x 5.24 in x 13.86 in
Dimensions (WxHxD):
15.3 lb
Weight:
Black
Available color options:
Power
Typical: 290 W, Standby: less than 1 W
Consumption:
120 V - 120 V
Power adapter voltage:
60 Hz
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: NAD Amplifiers
Description: The C 375BEE is far more than a bigger C 355BEE — in fact, it is much closer in spec to the M3 Integrated Amplifier from NAD's high end Masters Series. It also incorporates an updated version of NAD's "Building Block" concept to make the addition of the PP375 phono module and other affordable future upgrades possible. Attention to the most minute detail is evident everywhere, from the heavy gauge steel chassis to the sophisticated... read more