Musical Fidelity M6 CD specs

Output:

Output impedance 50 Ohms balanced or single ended.

Output, digital 0dB level XLR output: 4.4V rms balanced nominal. RCA output: 2.2V RMS single ended nominal.

DAC (Balanced & single-ended outputs)

DAC circuit 24 bit Delta-Sigma (bit stream) dual differential 8x over-sampling.

Total correlated jitter <135 picoseconds peak to peak.

Linearity <0.1dB down to –96dB.

Frequency response 10Hz to 20kHz, –0.2dB max.

Channel separation >105dB 20Hz to 20kHz.

Signal-to-noise ratio >117dB ‘A’ weighted.

Total harmonic distortion <0.003% 10Hz to 20kHz.


Connections:
Line level outputs One pair line level RCA connectors, left and right outputs. One pair line level XLR connectors, left and right outputs.

Digital outputs One RCA coaxial connector SPDIF. One TOSLINK optical connector.

Digital inputs One RCA coaxial connector SPDIF. One TOSLINK optical connector.

USB input USB type ‘B’ (square) socket.


Power requirement:

Mains voltages 115/230VAC 50/60Hz (factory pre-set). 100VAC 50/60Hz (alternative).

Consumption 20 Watts maxium.


Weight & Dimensions:

Unit only, unboxed 11.2kg (24⅔ lbs).

In shipping carton 15.5kg (34 lbs).

Width 440mm (17⅓"). Height including

feet 125mm (5"). Depth (front to back)

including terminals 385mm (15⅛").

Standard accessories

IEC type mains lead (10 Amp type). M6

remote control. Batteries, two LR03 or

AAA, manganese alkaline type.

Musical Fidelity reserves the right to make

improvements which may result in feature

or specification changes without notice.