Musical Fidelity AMSCD specs

Output:

Output impedance 50 ohms balanced or single ended.

Output, digital 0dB level XLR output - 4.4V rms balanced nominal.

RCA output - 2.2V rms single ended nominal.

DAC (Balanced and single-ended outputs)

DAC circuit 24 bit Delta-Sigma (bit stream) dual differential 8x oversampling.

Total correlated jitter <15 picoseconds peak to peak.

Linearity <0.1dB down to –96dB.

Frequency response 10Hz to 20 kHz – 0.2dB max.

Channel separation >105dB, 20 Hz to 20 kHz.

Signal-to-noise ratio >117dB ‘A’- weighted.

Total harmonic distortion <0.003%, 10Hz to 20 kHz.


Connections:

Line level outputs One pair line level

RCA connectors, left and right outputs.

One pair line level XLR connectors, left and right outputs.

Digital outputs One RCA coaxial connector SPDIF. One TOSLINK optical connector. One XLR AES output connector.

Digital inputs One RCA coaxial connector SPDIF. One TOSLINK optical connector. One XLR AES input connector.


Power requirement:

Mains voltages 115/230VAC 50/60Hz; (factory pre-set). 100VAC 50/60Hz (alternative).

Consumption 20 Watts maximum.

Weight and dimensions:
Unit only, unboxed 11.2 kg (24⅔ lbs).
In shipping carton 15.5 kg (34 lbs).
Width 440 mm (17⅓").
Height, including feet 125 mm (5").
Depth (front to back including terminals) 385 mm (15⅛").


Standard accessories:
IEC type mains lead (10-Amp type). AMS CD remote control. VARTA Lithium Li-Mn button type battery, CR2450. Musical Fidelity reserves the right to make improvements which may result in feature or specification change without notice.