DLS RA10 specs
General info
Car
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
0.1 %
THD:
10 - 125kHz at +-3dB
Frequency response:
Line level: 100dB
Signal to noise ratio:
Line in: 10 kohms +/-5%
Input impedance:
Bass: +/- 18dB at 40Hz ,
Tone controls:
Variable from 40Hz to 125Hz measured at 12 dB / Octave
Low pass filter:
Power amplifier
1
Amplified channels:
300W per channel into 4 ohms and THD 0.1%
Power output:
500W per channel into 2 ohms and THD 0.1%
780W per channel into 1 ohms and THD 0.1%
Class AB
Amplifier class:
10 - 125kHz at +-3dB
Frequency response:
100dB
Signal to noise ratio:
Unbalanced: 10 kohms
Input impedance:
: 8V
Input sensitivity:
over 200
Damping factor:
also know as: DLS Reference Series
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: DLS Amplifiers
Description: REFERENCE series RA10 is a mono amplifier rated at 300 Watts. Provides a nominal output of 500 Watts in 2 ohm load and 780 Watts in 1 ohm load.
Highly rated gadgets
-
10.0
FujiFilm X-T3
-
9.0
Sony WH-1000XM3
-
8.5
Xiaomi Mi A2
-
8.0
BlackBerry Motion
-
9.1
Apple iPhone XS Max
-
9.1
Apple iPhone XS
-
9.0
Panasonic LUMIX LX100 II
-
9.0
FujiFilm XF10
-
10.0
Nikon Z 7
