Linksys WAG160N specs
General info
Router
Device type:
Wireless, Modem (DSL/Cable)
Additional functionality:
Router
PPPoE, Dynamic IP, Static IP
Supported WAN connection types:
IPSec, PPTP, L2TP
VPN:
DHCP Server, Address reservation, Static routing, Port forwarding, UPnP, DMX Host, Firewall, Upgradeable firmware, Dynamic DNS, DMZ, QoS, Logging
Features:
Switch
4
Ports (RJ-45):
100/10
Ethernet speed:
Half-duplex, Full-duplex
Communication type:
Wireless
802.11a, 802.11b, 802.11g, 802.11n
Standards:
2.4 GHz
Supported frequency:
WEP, WPA v1, WPA v2
Data encryption / Security:
Disable SSID broadcast, MAC address filtering
Security features:
AP
Wireless mode:
Yes
Internal antenna:
1
Number of antennas:
2 dBi
Antenna gain:
Modem
DSL
Modem type:
ADSL2+
DSL Compliance:
Yes
Built-in PPPoE client:
Yes
Built-in PPPoA client:
Other
IP Address: 192.168.1.1 ; Username: admin ; Password: admin ; Hardware factory reset: There are two ways to reset the Modem Router’s factory defaults. Either press and hold the Reset button for approximately five seconds, or restore the defaults from the Administration > Factory Defaults screen of the Modem Router’s web-based utility
Device defaults:
Body
7.95 in x 1.34 in x 6.3 in
Dimensions (WxHxD):
0.8 lb
Weight:
US Availability
Available
Market status:
European Availability
Available
Market status:
EUR 79.99
MSRP price :
If you are interested in using our specs commercially, check out our Networking Devices specs database licensing page.
Filed in: Linksys Networking Devices