B&K AV 60.2 specs
General info
Home
Amplifier usage:
Power amplifier
Type:
Power amplifier
2
Amplified channels:
60W per channel into 8 ohms and THD 0.016%
Power output:
120W per channel into 4 ohms and THD 0.016%
5 - 45kHz
Frequency response:
100dB
Signal to noise ratio:
Unbalanced: 10 kohms
Input impedance:
for 1W : 0.1V
Input sensitivity:
: 28dB
Voltage gain:
14V per microsecond
Slew rate:
over 1000 at frequencies from 50Hz
Damping factor:
Connectivity
Unbalanced (RCA): 1
Inputs:
Spring terminals
Speaker connector type:
Body
5.44 in x 2.5 in x 11.25 in
Dimensions (WxHxD):
5.5 lb
Weight:
Power
Max: 150 W, Standby: less than 4 W
Consumption:
120 V - 240 V
Power adapter voltage:
Links
Official page:
-
in English:
-
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: B&K Amplifiers
Description:
Class D output stage - Highly efficient high end home stereo system with the ability to produce the highest quality audio with low power draw and minimal heat. Also allows for less noise with no input signal, since the internal circuitry is off when the unit has no signal.
Control Trigger - A control system is to allow remote switching of the amplifier's standby on/off feature.
Amp Status LED - The power LED shows whether... read more