Rotel RA-06 SE specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Solid State (Transistor / Integrated Circuit)
Construction type:
Preamplifier
0.03 % measured at frequencies from 20Hz to 20kHz
THD:
10 - 100kHz
Frequency response:
Line level: 100dB, Phono-MM: 80dB
Signal to noise ratio:
Line in: 24 kohms +/-5%, Phono-MM: 47 kohms
Input impedance:
Line level: 170mV, Phono-MM: 2.8mV
Input sensitivity:
less than 470 ohms
Output impedance:
Bass: +/- 6dB at 100Hz , Treble: +/- 6dB at 10kHz
Tone controls:
Maximum output level: 1V RMS
Preamplifier output:
Power amplifier
2
Amplified channels:
70W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz and THD 0.03%
Power output:
over 180 at frequencies from 20Hz to20kHz at 8ohms
Damping factor:
Bi-amping compatible, A/B Speaker connectors
Features:
Connectivity
Unbalanced (RCA): 5, Phono input (RCA): Yes, Phono-MM
Inputs:
Analog: Unbalanced (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Banana-plug compatible
Yes
Remote control:
12V Trigger
Body
17.13 in x 3.62 in x 13.46 in
Dimensions (WxHxD):
16.9 lb
Weight:
Gray
Available color options:
Power
Typical: 36 W, Max: 300 W, Standby: less than 3.7 W
Consumption:
120 V - 230 V
Power adapter voltage:
50 Hz, 60 Hz
US Availability
Available
Market status:
European Availability
Available
Market status:
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Rotel Amplifiers
Description: It’s all in the details. The RA-06 SE looks identical to the amplifier it updates, the incredibly wellregarded RA-06. And the myriad changes that have gone on under the sleek silver casework will be meaningless to many of the people who will get countless hours of musical enjoyment from this amplifier. But every upgraded capacitor, every modified negative feedback component, and each of the updated resistors combine to make a performance... read more