Rotel RB-1092 specs
General info
Home
Amplifier usage:
Power amplifier
Type:
Power amplifier
2
Amplified channels:
500W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz and THD 0.03%
Power output:
1000W per channel into 4 ohms and THD 0.09%
Class D
Amplifier class:
10 - 40kHz at +-3dB
Frequency response:
118dB
Signal to noise ratio:
Balanced: 11.1 kohms
Input impedance:
: 2.2V
Input sensitivity:
: 27.2dB
Voltage gain:
over 400 at 8ohms
Damping factor:
Connectivity
Binding post terminals
Speaker connector type:
Banana-plug compatible
12V Trigger
Body
17.01 in x 3.62 in x 16.02 in
Dimensions (WxHxD):
22.05 lb
Weight:
Gray
Available color options:
Power
Typical: 600 W, Standby: less than 3 W
Consumption:
120 V - 120 V
Power adapter voltage:
60 Hz
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Rotel Amplifiers
Description: The RB-1092 is the stereo version of the RB-1091 Class D amplifier. It can generate up to 2 x 500 watts into an 8 ohm load and can drive virtually any pair of loudspeakers to very loud sound pressure levels when required. When combined with an RB-1091 and another RB-1092 for a five-channel home theater system, the sonic result is absolutely breathtaking.