Polk Audio PA 1100.5 specs
General info
Car
Amplifier usage:
Power amplifier
Type:
Preamplifier
Variable from 50Hz to 500Hz measured at 12 dB / Octave
High pass filter:
Variable from 50Hz to 500Hz measured at 12 dB / Octave
Low pass filter:
Power amplifier
5
Amplified channels:
80W per channel into 4 ohms measured at frequencies from 20Hz to 20kHz
Power output:
280W per channel into 4 ohms measured at frequencies from 20Hz to 0.250kHz
125W per channel into 2 ohms measured at frequencies from 20Hz to 20kHz
600W per channel into 1 ohms measured at frequencies from 20Hz to 0.250kHz
Class D
Amplifier class:
20 - 20kHz
Frequency response:
98dB
Signal to noise ratio:
65dB
Channel separation:
Unbalanced: 20 kohms
Input impedance:
Manual Gain level adjustment
over 150
Damping factor:
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Polk Audio Amplifiers
Description: Want one amp to do it all? This is it. The PA100.5, a 5-channel amplifier that can drive your fronts, rears and subwoofer. Run 4 full-range speakers and one subwoofer. A super-efficient Class D Pulse-width modulation amplifier draws less power and runs cooler, so you won't heat up the inside your ride or dim your headlights. Just let it rip.