Dual XDMA6630 Questions & Answers
Dual XDMA6330BT Problem
Follow Problem
I've installed this deck by myself and done a crappy job. First off I did not tape the exposed wires and in result I blown the radio fuse in my car. When I first connected the wires together without taping them** before I blew the fuse** the deck was working it turned on and off but the radio didnt play. i could switch stations only to hear static. after i replaced the fuse i rewired them all together exactly as i did before, but now the face does not turn on or off and the disc was working, it only accepted and ejected the disc. so i asked a friend for help and told to connect the red wire with the yellow wire and it worked! but unfortunately the radio still does not play and the memory is not working. What did I do wrong? Please help!
Display mode:
Like
Unlike
Level 6
Probably you have a faulty antenna in your car or you forgot to connect it to the head unit. For the memory to work you need to connect the yellow cable to a constant 12V circuit (or directly to the car battery). If you connected it to the ignition the unit will work only when the key is in the car and won't remember the radio stations.
not rated
1
WingMan
on Jul 20, 2011
Level 6
Probably you have a faulty antenna in your car or you forgot to connect it to the head unit. For the memory to work you need to connect the yellow cable to a constant 12V circuit (or directly to the car battery). If you connected it to the ignition the unit will work only when the key is in the car and won't remember the radio stations.
Comments (2)
- Add comment
- Thank
- Not helpful
Like
Unlike
Level 1
thanks ill give it try
not rated
2
jlolmfao
on Jul 22, 2011
Level 1
thanks ill give it try
Comments (0)
- Add comment
- Thank
- Not helpful
Highly rated gadgets
-
8.0
BlackBerry Motion
-
10.0
FujiFilm X-T3
-
9.0
Sony WH-1000XM3
-
9.0
FujiFilm XF10
-
9.1
Apple iPhone XS Max
-
9.1
Apple iPhone XS
-
9.0
Panasonic LUMIX LX100 II
-
8.5
Xiaomi Mi A2
-
10.0
Nikon Z 7
