HDP 1 is a mono D-Class amplifier providing very high power and efficiency, being able to astonish for the excellent musicality. HDP 1 is ideal to drive subwoofers and can work on 2 Ohm and 4 Ohm loads, providing 600W and 1000W power.

HDP 4 is a D-Class four-channel amplifier, perfect to satisfy any need. It is the most compact HDP; nonetheless, like the other models, it can reach very high power levels: in less than 30 cm (12 inches) it can provide up to 1000W on 2 channels at 4 Ohm! It can be used in full range as well as with crossover...

HDP 5 is a D-Class five-channel amplifier suitable for complex installations, able to offer up to 950W total. The built-in crossovers are settable as Full Range and Hi-Pass at 12dB/Oct. or Hi-Pass + Band-Pass and Lo-Pass at 24dB/Oct. The extremely flexible crossover section allows the use of HDP 5 in...

The D-class technology, employed in the HP 1 D and HP 1 KD, uses a 120 kHz sampling frequency, providing the best transient power response. Each output stage is comprised of two sub-stages in parallel with several TO247 MOSFETs, each rated for 380W power dissipation.
The output stages are fed current...

The D-class technology, employed in the HP 1 D and HP 1 KD, uses a 120 kHz sampling frequency, providing the best transient power response. Each output stage is comprised of two sub-stages in parallel with several TO247 MOSFETs, each rated for 380W power dissipation.
The output stages are fed current...

Hertz HP 5 is an AB Class, five-channel amplifier with 980W (RMS) total power. Thanks to its 120W (RMS) X 4 (2 Ohm) and 500W (RMS) x 1 (2 Ohm), it is the best solution for Front + Rear + Subwoofer complete systems through the use of inside crossovers.
The whole HP line is equipped with many innovative...

The D-class technology, employed in the HP 1 D and HP 1 KD, uses a 120 kHz sampling frequency, providing the best transient power response. Each output stage is comprised of two sub-stages in parallel with several TO247 MOSFETs, each rated for 380W power dissipation. The output stages are fed current...

Hertz HP 1 D is a D Class mono amplifier with 2300W (RMS) power on 1 Ohm. The special feature HP LINK provides the ability of two amplifiers to operate in bridged mode to obtain extremely high powers. The whole HP line is equipped with many innovative functions which make it simply unique. HP MANAGER...

The EP 2 is a stereo amplifier which can be bridged in mono as well; it is the ideal choice to upgrade your factory system: pre-amplified inputs as well as hi-level inputs offer the possibility for the EP 2 to be interfaced with any head units, including factory OEM systems.
The EP 2 boasts extreme reliability...

The EP 4 X is a powerful amplifier delivering 4 x 160W (RMS) into a 2 Ohm load. Thanks to its four separate channels, it provides many different system design possibilities.

Pre-amplified as well as hi-level inputs offer the opportunity for the EP 4 to be interfaced with any head unit, including factory...

The EP Energy-Power, series electronics are based upon 70μm thick dual-layer PCBs
made from FR-4 material, contributing to the EP series superior performance in terms
of S/N Ratio and overall signal integrity. Employing FR-4 material with 70μm thick
copper traces ensures high reliability, and in combination...

The HE 4 is a four-channel, 800W (Max) amplifier that can be bridged in dual mono as well for utmost flexibility; it is the ideal choice to upgrade your factory system: pre-amplified inputs as well as hi-level inputs offer the possibility for the HE 4 to be interfaced with any head units, including factory...

The Elettromedia R&D experience, combined with the use of the most advanced technologies, enabled the Hertz team to build subwoofers and amplifiers with explosive SPL performance.
With its three products, the SPL Monster line creates impressive sound pressure and power. Our promise is your reality! The...

The EP 2 X is a very powerful stereo amplifier delivering 2 x 350W (RMS) into a 2 Ohm load. It can also be bridged into mono delivering up to 700W (RMS) to drive a subwoofer. Pre-amplified inputs as well as hi-level inputs allows the EP 2 X to be interfaced with any head units, including factory OEM...

The EP 4 is an amplifier designed to reproduce any musical genres: thanks to its four separate channels, it provides many different system configurations.

Pre-amplified inputs as well as hi-level inputs offer the possibility for the EP 4 to be interfaced with any head units, including factory OEM sources.
EP...