AMPLIFIER ONE is a state-of-the-art integrated amplifier with focus on sound quality and handling. Every single component is chosen after many hours of listening sessions and reliability tests.
The amplifier is equipped with 1 pair of XLR input, 4 pairs of RCA inputs and PRE-out for an additional power...

ULTIMATE series A7 Five-channel amplifier rated at 4 x 60 Watts on the stereo channels plus 1 x 300 Watts from the mono sub channel.

Build to provide a complete in car entertainment system system with all necessary crossovers, all in one amplifier.

ULTIMATE series A5, a three-channel amplifier rated at 2 x 85 Watts in stereo an 1 x 300 Watts in mono. In two ohm load it delivers 2 x 100 Watts in stereo and 1 x 500 Watts in mono. The mono channel is 1 ohm stable. The perfect amplifier for a good front system and one or more subwoofers in the trunk....

ULTIMATE series A4 is a powerful 4-channel amplifier. The amplifier is 1 ohm stable and provides a power output of 4 x 85 Watts with 4-ohm stereo and 2 x 250/400 Watts with 4/2-ohm mono bridge-connection

REFERENCE series RA50 is a 5-channel amplifier rated at 4 x 70 + 1 x 265 Watts. The amplifier is 2 ohm stable on all channels.

REFERENCE series RA40 is a 4-channel amplifier. Provides a power output of 4 x 75 Watts with 4-ohm stereo and 2 x 220 Watts in 4 ohm mono bridge-connection.

REFERENCE series RA30 is a 3-channel amplifier rated at 2 x 70 + 1 x 265 Watts.

CAT31 is a 24 Volt amplifier for trucks and buses. It is a three channel amplifier with a nominal output of 2 x 75 Watts + 1 x 170 Watts (1 x 280 Watts in 2 ohm).

CA51, now in a new exclusive design, but the inside is of the same high quality as before. CA 51 is an amplifier suitable for full in-car entertainment systems. Nominal output of 4 x 50 Watts + 1 x 170 Watts on a mono sub channel. Built-in low-pass and high-pass filters. Variable phase shift control...

CA 41 is a powerful amplifier with power output of 4 x 70 Watts. With a mono bridge-connection, it puts out all of 200 Watts.

CA31 is a three channel amplifier with a nominal output of 2 x 65 Watts + 1 x 170 Watts (1 x 280 Watts in 2 ohm).

ULTIMATE series TA2 is a HiFi two-channel amplifier with 2 x 100 Watts output power. This is an extremely well-sounding amplifier for car use. We did not compromize in any section of the construction when we designed the electronic circuits.

The TA2 is using the very best components in all sections...

ULTIMATE series A3 is a powerful two-channel amplifier. A true, dual mono block with separate power sources that provides power output of 2 x 150 Watts with 4 ohm stereo and 550/870 Watts with 4/2 ohm mono.
The amplifier is 1 ohm stable.

ULTIMATE series A2 is a two-channel amplifier. Power output of 2 x 85 Watts with 4-ohm stereo and 290/450 Watts with 4/2-ohm mono bridge-connection. The amplifier is 1 ohm stable.

REFERENCE series RA25 is a two-channel amplifier. Provides a power output of 2 x 70 Watts with 4-ohm stereo and 220 Watts with 4 ohm mono bridge-connection.

REFERENCE series RA20 is a two-channel amplifier. Provides a power output of 2 x 130 Watts with 4-ohm stereo and 440 Watts with 4 ohm mono bridge-connection.

CA 23 is a powerful amplifier with a power output of 2 x 135 Watts. With a mono bridge-connection, it puts out all of 400 Watts.

CA 22 is a powerful amplifier with a power output of 2 x 60 Watts. With a mono bridge-connection, it puts out all of 200 Watts.

ULTIMATE series A6. A 1 ohm stable monoblock that´s perfect for SPL. Extremely powerful power supply. The output power in 4 ohms are 500 true RMS watts. A cooling fan is built in but the amplifier also provides a built-in fan control for external cooling fan.

REFERENCE series RA10 is a mono amplifier rated at 300 Watts. Provides a nominal output of 500 Watts in 2 ohm load and 780 Watts in 1 ohm load.

CAD15 is a very powerful mono amplifier with a nominal power of 1600 Watts in 1 ohm load. In 4 ohm load the output is 550 Watts, and in 2 ohms 900 Watts. CAD15 is a digital class D amplifier.

CAD11 is a powerful mono amplifier with a nominal power of 1050 Watts in 1 ohm load. In 4 ohm load the output is 400 Watts, and in 2 ohms 750 Watts. CAD11 is a digital class D amplifier.

CA 12 is a powerful mono amplifier with a nominal output of 220 Watts in 4 ohm, 400 Watts in 2 ohm load, and 500 Watts in 1 ohm load.

Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz. Variable subsonic filter 15-150 Hz. Continuously variable phase control 0-180 degrees.

Built-in...

MRA 41 is a powerful amplifier with power output of 4 x 70 Watts. With a mono bridge-connection, it puts out all of 200 Watts.

MRA 22 is a powerful amplifier with a power output of 2 x 60 Watts. With a mono bridge-connection, it puts out all of 200 Watts. Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz. The high-pass filter is variable between 15 and 500 Hz. Built-in protection circuits shut down the...

MRA 22 is a powerful amplifier with a power output of 2 x 60 Watts. With a mono bridge-connection, it puts out all of 200 Watts. Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz. The high-pass filter is variable between 15 and 500 Hz. Built-in protection circuits shut down the...