Element Electronics ELCHS321 Questions & Answers
Element ELCHS321 not saving channels after power off
Follow Problem
The problem I am having is the fact that after turning on the TV and doing a channel scan it picks up all the channels, but when I turn it off and back on the channels are lost and I have to do a scan again
Display mode:
Like
Unlike
Level 4
Take a look in your manual (or contact Element's support) to see if this particular TV set has the Shop mode and how to turn it off. If the mode is on, you might not be able to save the channels before turning it off or changing it to standard mode. Also see if you have the latest available firmware installed and if not, upgrade if possible.
1
1
leviathan
on Dec 27, 2011
Level 4
Take a look in your manual (or contact Element's support) to see if this particular TV set has the Shop mode and how to turn it off. If the mode is on, you might not be able to save the channels before turning it off or changing it to standard mode. Also see if you have the latest available firmware installed and if not, upgrade if possible.
Comments (0)
- Add comment
- Thank
- Not helpful
Like
Unlike
Level 9
Let us know what happened after you followed @leviathan instructions and we`ll assist you further if needed
not rated
2
Immortal
on Dec 27, 2011
Level 9
Let us know what happened after you followed @leviathan instructions and we`ll assist you further if needed
Comments (0)
- Add comment
- Thank
- Not helpful
Highly rated gadgets
-
9.0
FujiFilm XF10
-
9.0
Panasonic LUMIX LX100 II
-
10.0
Nikon Z 7
-
8.0
BlackBerry Motion
-
10.0
FujiFilm X-T3
-
9.1
Apple iPhone XS Max
-
9.0
Sony WH-1000XM3
-
9.1
Apple iPhone XS
-
8.5
Xiaomi Mi A2
