McIntosh MA6600 specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
0.005 % measured at frequencies from 20Hz to 20kHz
THD:
20 - 20kHz at +-0.5dB
Frequency response:
Line level: 92dB, Phono-MM: 84dB
Signal to noise ratio:
Line in: 20 kohms +/-5%, Phono-MM: 47 kohms
Input impedance:
Line level: 250mV, Phono-MM: 2.5mV
Input sensitivity:
less than 220 ohms
Output impedance:
Bass: +/- 12dB at 30Hz , Treble: +/- 12dB at 10kHz
Tone controls:
Nominal output level: 1400mV, Maximum output level: 8V RMS
Preamplifier output:
Power amplifier
2
Amplified channels:
200W per channel into 8 ohms
Power output:
20 - 20kHz at +-0.5dB
Frequency response:
115dB
Signal to noise ratio:
Unbalanced: 10 kohms
Input impedance:
: 1.4V
Input sensitivity:
: 29dB
Voltage gain:
over 40
Damping factor:
Connectivity
Unbalanced (RCA): 12, Balanced (XLR): 2, Phono input (RCA): Yes
Inputs:
Analog: Unbalanced (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Banana-plug compatible
Body
17.5 in x 7.63 in x 22 in
Dimensions (WxHxD):
75 lb
Weight:
Power
Standby: less than 1 W
Consumption:
100 V - 240 V
Power adapter voltage:
50 Hz, 60 Hz
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: McIntosh Amplifiers
Description: The MA6600 integrated amplifier teams a very low distortion, full function preamplifier with a potent 200 Watt per channel autoformer-coupled amplifier. The ability to accept an optional tuner module, enables the MA6600 to become the first stereo receiver offered by McIntosh in over 15 years.