SpeakerCraft MZC-66 specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
0.7 %
THD:
20 - 20kHz at +-1.5dB
Frequency response:
Line level: 100dB
Signal to noise ratio:
50dB
Channel separation:
Line in: 22 kohms +/-5%
Input impedance:
Line level: 300mV
Input sensitivity:
less than 300 ohms
Output impedance:
Bass: +/- 10dB at 100Hz , Treble: +/- 10dB at 10kHz
Tone controls:
Nominal output level: 180mV, Maximum output level: 1.7V RMS
Preamplifier output:
Power amplifier
2
Amplified channels:
30W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz
Power output:
45W per channel into 4 ohms
20 - 20kHz at +-1.5dB
Frequency response:
100dB
Signal to noise ratio:
50dB
Channel separation:
Unbalanced: 22 kohms
Input impedance:
: 0.3V
Input sensitivity:
Connectivity
Unbalanced (RCA): 24
Inputs:
Analog: Unbalanced (RCA)
Outputs:
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: SpeakerCraft Amplifiers
Description: The MZC 66 and 88 are loaded with technical advancements that make the system both dynamic and flexible. With 12 or 16 channels of digital amplification, depending on the model, a single unit can power up to eight stereo zones or areas of the home with no need for additional amplifiers. Should a zone require more power, the unit offers a separate pre-amp output for each zone. This output can be either fixed or variable allowing... read more