SpeakerCraft MZC-64 specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
0.7 %
THD:
20 - 20kHz at +-1.5dB
Frequency response:
Line level: 100dB
Signal to noise ratio:
50dB
Channel separation:
Line in: 22 kohms +/-5%
Input impedance:
Line level: 0.3mV
Input sensitivity:
less than 300 ohms
Output impedance:
Bass: +/- 10dB at 100Hz , Treble: +/- 10dB at 10kHz
Tone controls:
Nominal output level: 0.18mV, Maximum output level: 1.7V RMS
Preamplifier output:
Power amplifier
2
Amplified channels:
30W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz
Power output:
45W per channel into 4 ohms to 1kHz
20 - 20kHz at +-1.5dB
Frequency response:
100dB
Signal to noise ratio:
50dB
Channel separation:
Unbalanced: 22 kohms
Input impedance:
: 2.8V
Input sensitivity:
Connectivity
Unbalanced (RCA): 12
Inputs:
Analog: Unbalanced (RCA)
Outputs:
12V Trigger, RS-232
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: SpeakerCraft Amplifiers
Description: Each zone can have its own individual command set and source limitations. For example, if you choose a particular CD player to be used exclusively in the master bedroom and the den, the system can be programmed to restrict access to that CD player from all other zones in the house. In smaller systems where video distribution is unnecessary and cost is a critical factor, the MZC 64 is an excellent solution.The 64 offers inputs for... read more