Cary Audio Design Model 7.125 specs
General info
Home
Amplifier usage:
Power amplifier
Type:
Solid State (Transistor / Integrated Circuit)
Construction type:
Power amplifier
7
Amplified channels:
125W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz
Power output:
190W per channel into 4 ohms measured at frequencies from 20Hz to 20kHz
20 - 20kHz at +-0.1dB
Frequency response:
100dB
Signal to noise ratio:
90dB
Channel separation:
Balanced: 50 kohms, Unbalanced: 50 kohms
Input impedance:
: 1V
Input sensitivity:
: 28dB
Voltage gain:
50V per microsecond
Slew rate:
over 400 at frequencies from 10Hz to0.4kHz
Damping factor:
Connectivity
Unbalanced (RCA): 7, Balanced (XLR): 7
Inputs:
Binding post terminals
Speaker connector type:
Banana-plug compatible
12V Trigger
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Cary Audio Design Amplifiers
Description: The Model 7.125 is a seven channel power amplifier rated at 125 watts per channel into an 8 ohm load and 190 watts per channel into a 4 ohm load. The rear panel has XLR and RCA inputs and a remote turn on trigger. With its power output it is capable of driving most multi-channel speaker systems. Quiet, low distortion operation with unmatched reliability.