Rotel RA-04 SE specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
0.03 %
THD:
10 - 40kHz at +-1dB
Frequency response:
Line level: 100dB, Phono-MM: 80dB
Signal to noise ratio:
Line in: 24 kohms +/-5%, Phono-MM: 47 kohms
Input impedance:
Line level: 170mV, Phono-MM: 2.8mV
Input sensitivity:
Bass: +/- 6dB at 100Hz , Treble: +/- 6dB at 10kHz
Tone controls:
Maximum output level: 1V RMS
Preamplifier output:
Power amplifier
40W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz and THD 0.03%
Power output:
10 - 40kHz at +-1dB
Frequency response:
100dB
Signal to noise ratio:
Unbalanced: 24 kohms
Input impedance:
over 180 at frequencies from 20Hz to2kHz at 8ohms
Damping factor:
Body
17.13 in x 2.83 in x 13.46 in
Dimensions (WxHxD):
13 lb
Weight:
Gray
Available color options:
Power
Typical: 220 W
Consumption:
Links
Official page:
-
in English:
-
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Rotel Amplifiers
Description: Every journey has to start somewhere. For an entry into the world of high-fidelity sound there is no better stepping off point than the RA-04 SE amplifier. It takes much of the original design and high-quality sound of the RA-04. But knowledge and experience gained developing both the high-end 15 Series and 06 SE Series have led to significant changes to the components used, and the sound produced.