Rotel RA-1070 specs
General info
Home
Amplifier usage:
Integrated amplifier
Type:
Preamplifier
Line level: 102dB, Phono-MM: 70dB
Signal to noise ratio:
Line in: 33 kohms +/-5%, Phono-MM: 68 kohms
Input impedance:
Phono-MM: 1.2mV
Input sensitivity:
Power amplifier
2
Amplified channels:
100W per channel into 8 ohms measured at frequencies from 20Hz to 20kHz and THD 0.03%
Power output:
4 - 100kHz at +-3dB
Frequency response:
102dB
Signal to noise ratio:
Unbalanced: 33 kohms
Input impedance:
: 1.5V
Input sensitivity:
over 400
Damping factor:
High-current power, A/B Speaker connectors
Features:
Connectivity
Unbalanced (RCA): 7, Phono input (RCA): Yes, Phono-MM
Inputs:
Analog: Unbalanced (RCA)
Outputs:
Binding post terminals
Speaker connector type:
Banana-plug compatible
Yes
Remote control:
12V Trigger, RS-232
Body
16.93 in x 4.76 in x 14.17 in
Dimensions (WxHxD):
22.7 lb
Weight:
Power
Typical: 400 W
Consumption:
115 V - 230 V
Power adapter voltage:
50 Hz, 60 Hz
If you are interested in using our specs commercially, check out our Amplifiers specs database licensing page.
Filed in: Rotel Amplifiers
Description: Flexibility and convenience highlight the RA-1070. Substantial power (100 watts x 2) and a damping factor of 400 assure precise control of all but the most demanding loudspeakers. The high capacity power supply features an oversized Rotel made toroidal transformer and British-made BHC slit foil capacitors. Convenience isn't an afterthought either. A separate Record Out selector adds flexibility. In addition, you''ll find a 12 volt... read more